Offset Bracket

When installing around a gutter or ridge line, firstly attach the standard bracket to the offset bracket using the nuts and bolts provided. You want to install the bracket so that the first bend of the standard bracket is 2m from the ground. The first bend is the bend between the vertical 20cm section and the 70cm section.

If mounting onto wood, simply screw the offset bracket to the wood using 2-3 screws. If mounting onto brick, use a marker pen (through the holes) to mark on the wall where you need to drill. Using a 6mm drill bit create holes where you marked. Plug the holes using red wall plugs. Then screw the bracket to the wall.

If the bracket is too flexible, consider buying some blackened steel wire, a zip clip, a loop clamp and a vine eye bolt. Use these to attach the top of the bracket to the wall or wooden surface. Tighten the wire to provide stability.

If products are unused, undamaged and still in the original packaging, you can return the product for a full refund within 7 days of delivery (excluding costs associated with delivery). You will need to pay for the return delivery yourself which must be trackable. 

​If upon the receipt of the returned products, it is clear that the product has been used or is damaged, you will not receive a refund.  

Delivery Time: 3-5 Working Days

£25 delivery charge for orders over £120

£14 delivery charge for orders <£120

Please read the Terms and Conditions page before purchasing this product- www.thecatprooffencecompany.co.uk/termsandconditions